Drive Shaft 28 Spline Slip Yoke
T5 Manual Transmission, C4 or a AOD Automatic Transmission.
for all 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs
Looking to replace your worn out Drive Shaft Slip Yoke?
This Driveshaft Slip Yoke is a direct replacement for all 1983-2004 Mustangs with a T5, C4 or an AOD Transmission. The main job of the slip yoke is to rotate the U-joints which is connected to the driveshaft. The Driveshaft then rotates, sending power to the rear end.
This 28 Spline Driveshaft Slip Yoke will get installed on the rear tail section of your transmission.
The reproduction Slip Yoke features the correct groves cut out for the original C-clips. Notches are cut out on either side of the Slip Yoke this allows for smooth movement without binding up.
Vehicle Fitment:
- 1983-1995 5.0L Mustangs with T5 Transmission
- 1983-1995 5.0L Mustangs with AOD Transmission
- 1994-2004 3.8L Mustangs with T5 Transmission
- 1994-1995 3.8L Mustangs with AOD Transmission
- 1979-2004 Mustangs with a C4 Transmission
Note:
This 28 Spline Driveshaft Slip Yoke can be used on a 1965-1973 Mustang with a T5, AOD or C4 transmission, but a custom u-joint may be required.
