TH350 Crossmember Chevelle 1968-1972 Convertible or Box Frame

Write a Review

Your Price: $398.00

Crossmember fits GM A body (Chevelle/El Camino/Malibu/Monte Carlo/Skylark/Cutlass/Lemans/Tempest/GTO) 1968-1972 with TH350/MUNCIE/POWERGLIDE/T-10/SUPER T-10/SAGINAW/TH200 transmission

Part Number: CMRCAEC2

Crossmember Options

Energy Suspension Polyurethane Transmission Mount Fits Most GM RWD Vehicles (+$34.95)

The item you are trying to purchase is currently out of stock.
Please enter your name, email, and phone number below.
We will contact you as soon as this product is available.

Name: *

Email: *

Phone: *

Verification: *

Type the word above...

Quantity

Description

Crossmember fits GM A body (Chevelle/El Camino/Malibu/Monte Carlo/Skylark/Cutlass/Lemans/Tempest/GTO) 1968-1972

FITS THE FOLLOWING TRANSMISSIONS TH350/MUNCIE/POWERGLIDE/T-10/SUPER T-10/SAGINAW/TH200/TH400/2004R

INCLUDES:

NEW MOUNTING HARDWARE (PURCHASE TRANSMISSION MOUNT SEPARATELY)
FINISHED IN A BLACK POWDER COAT

1968-1972 CONVERTIBLE OR BOXED FRAME (1 OPTION) ( NOTE: DISTANCE BETWEEN CROSSMEMBER FRAME HOLES IS APPROXIMATELY 47-1/2 MEASURE YOUR FRAME OR CROSSMEMBER TO INSURE PROPER SELECTION)

INSTALLATION NOTES:

THE CROSSMEMBER IS INSTALLED WITH THE TRANSMISSION MOUNTING TAB POSITIONED TOWARDS THE FRONT OF THE CAR

THE CROSSMEMBER IS INSTALLED SO THAT THE EXHAUST CLEARANCE HUMPS ARE CLOSED ON THE TOP AND OPEN ON THE BOTTOM.

THE SUPPLIED ALUMINUM SPACERS ARE UTILIZED TO PROVIDE CUSTOM POSITIONING OF THE TRANSMISSION MOUNT. THEY ARE TO BE POSITIONED BETWEEN THE CROSSMEMBER MOUNTING TAB AND THE TRANSMISSION MOUNT. SELECT THE DESIRED AMOUNT OF SPACERS AND MATCH A BOLT OF PROPER LENGTH TO INSURE FULL ENGAGEMENT INTO THE TRANSMISSION MOUNT. SOME APPLICATIONS WILL NOT REQUIRE ANY SPACERS.

SOME VEHICLES OF THIS GENERATION ARE EQUIPPED WITH A CROSSMEMBER THAT BOLTS DIRECTLY TO THE VEHICLES FRAME RAIL, WHILE OTHERS ARE EQUIPPED WITH A CROSSMEMBER THAT UTILZES A TAB THAT SETS ON THE FRAME RAIL AND IS THEN CLAMPED BY A STEEL CAP THAT IS EMBEDDED WITH A RUBBER LINER. THE RCAEC2 CROSSMEMBER BOLTS DIRECTLY TO THE FRAME RAIL AND UTILIZES THE FACTORY FRAME HOLES. TO UTILIZE THE PROVIDED 7/16 HARDWARE IT IS NECESSARY TO ENLARGE THE HOLES IN THE FRAME RAILS WITH A 1/2" DRILL. IF THE INSTALLER CHOOSES TO UTILZE THE STOCK SIZE 3/8 HARDWARE, IT IS STRONGLY RECOMMENDED THAT THE INSTALLER OBTAIN GRADE 8 FASTENERS AND WASHERS TO COMPENSATE.

FORD 10R80 2.7L/3.5L V6 TRANSMISSION & CONVERTER PACKAGE F-150 2018-2020

Price: $5,995.00

Select Options

Low Viscocity Automatic Transmission Fluid 1 Quart

Price: $14.09

Add To Cart

700R4 Valve Body Separator Plate Gasket Set (1987-1992) Upper & Lower (Set of 5)

Price: $34.50

Add To Cart

TH350 Crossmember Chevelle 1968-1972 Convertible or Box Frame

Choose Options

Related Items

Recently Viewed Items